- 24/7 Emergency Response
The water is gone but your floors still feel damp. That moisture is sitting inside your building materials right now. Mr. Damage Rescue provides certified structural drying that removes it completely, using commercial air movers and dehumidifiers placed by IICRC-trained technicians who document every reading.
In Business
Rated
Contractors
General Liability
Dispatch
Who It's For
Structural drying is the controlled removal of moisture absorbed into a building’s materials after water intrusion. It goes beyond pumping out standing water. Framing, subfloors, drywall, and insulation hold water inside them, and specialized equipment is required to pull that moisture out and return materials to their normal dry state.
You need it any time water has been present long enough to soak into surfaces. Burst pipes, appliance failures, roof leaks, sewage backups, and fire suppression water all leave saturated materials behind. Once a water extraction service removes the standing water, the drying phase is what actually protects the structure.
Wet materials fail in predictable ways. Wood swells and warps, drywall crumbles, subfloors delaminate, and mold colonies begin forming within 24 to 48 hours. Skipping this phase means paying for demolition and mold remediation later, at several times the cost of drying the property correctly the first time.
Our Services
You do not always see the water that is causing the damage.
Not sure which phases your situation needs? We assess first and recommend only what is necessary — no upsells.
Every hour of trapped moisture increases mold risk and repair scope. If you suspect hidden water, have it measured today rather than guessing.
Our Services
Structural drying is a system of coordinated methods, and your property may need any combination of them.
Not sure which phases your situation needs? We assess first and recommend only what is necessary — no upsells.
Why Homeowners Choose Us
Licensed and IICRC-certified since 2001 — one crew, start to finish for Riverside-area homeowners.
Mold begins forming within 24 to 48 hours. Our dispatch line runs around the clock and technicians are typically on site within 60 to 90 minutes of your call.
Our technicians hold both WRT and ASD certifications, meaning every job follows the IICRC S500 standard rather than a technician's personal habits or guesswork.
We keep drying until affected materials match unaffected baseline readings. If the standard is not met, equipment stays and monitoring continues at no additional cost.
You receive the log each visit. No unexplained equipment humming for a week, no vague answers about progress, no surprise extension of the timeline.
How It Works
Call 951-458-6466 anytime. We gather details, dispatch a certified technician, and give you an arrival window immediately.
We measure the full affected area with thermal imaging and meters, then provide a written scope and cost estimate before any equipment is placed.
Air movers and dehumidifiers are positioned by calculation. We return daily to record readings, reposition units, and track progress against baseline.
When readings confirm the dry standard, equipment is removed and you receive the complete moisture log for your records and insurance claim.
Pricing
We give written estimates before equipment is placed, and the number you approve is the number you pay. Cost depends on measurable factors, not guesswork.
What affects your price: the square footage of affected area, how many rooms and levels are involved, the water category (clean, gray, or black), how long materials stayed wet, and whether cavity drying is required.
Typical range: $1,800 to $4,500 for a standard residential drying project covering two to three affected rooms over three to five days. Single-room jobs often fall below that range. Most projects are covered by homeowners insurance, and we bill carriers directly.
Single Wall
Drying equipment + moisture monitoring
Multi-Room
Full structural drying + moisture monitoring + cavity drying
Frequently Asked Questions
Most residential projects take three to five days. Heavily saturated materials or cavity drying can extend that to seven days.
No. Extraction removes standing water only. Moisture absorbed into framing, subfloors, and drywall requires dedicated drying equipment to remove.
We compare readings in affected materials against unaffected baseline areas. When they match, the dry standard is met and documented.
In most covered water loss claims, yes. Our daily moisture logs are the documentation adjusters require to approve the work.
Household units lack the capacity to dry building materials. Professional dehumidification equipment removes many times more moisture per day.
Usually yes, though equipment is loud and rooms stay warm. We discuss occupancy on arrival based on water category.
Call 951-458-6466 and a technician is typically on site within 60 to 90 minutes, day or night.
● Emergency Hotline · Live Now
Every hour trapped moisture stays in your building materials increases the risk and the cost. Our certified technicians are on call 24/7 with the equipment and documentation to get your property dry to standard.
